N Normal output R Raw output D Debug output M Multiplex output Q Show bytes with parity error q Do not show bytes with parity error P Show unprocessed control bytes (Normal mode) P Show control codes as ASCII/Hex, strip parity and nulls (Raw mode) p Do no show unprocessed control bytes (Normal mode) p Preserve parity and nulls (Raw mode) F Show frame count f Do not show frame count D Drop frame on d Drop frame off C Reset frame count A Output ANSI codes for cursor position and character attributes (Normal mode only) a No ANSI codes W Show cursor position in plain text (ANSI mode) w Do not show cursor position (ANSI mode) K Process cursor position codes (ANSI mode) k Do not process cursor position codes (ANSI mode) T Process tab codes t Do not process tab codes H Show special printable characters h Do not show special printable characters E Capture even field e Do not capture even field O Capture odd field o Do not capture odd field 1 Decode CC1 2 Decode CC2 9 Decode XDS/V-Chip Y Majority sample y Single bit sample G Enable output g Disable output I Turn on handshake when decode error i Turn on handshake when valid non-null char decoded S Save settings in EEPROM s Show current settings V Show version Optional OSD Commands --------------------------- ! Display CC1 @ Display CC2 ( Display XDS Graze ) Display XDS Full _ Display Off Z Reset OSD Chip z Initialize OSD Chip